SALE PENDING - 1/15/09
Have you been wanting an RF generator that goes much higher than the usual HP8640 or 8660, or Fluke 6060A.....and does much, much more ??
This very nice WK PSG2400L is what you're looking for. All the way from 50khz to 2400mhz, with a high-performance modulation-section too. AM/FM/PM, built-in wide range DDS modulation-source; and provision to use that and a 2nd external mod-source at the same time for complex-modulations.
One of the nicest capabilities of this unit is that it also does SWEEP! You can not only sweep the frequency, but also the output-level too. In fact, you can sweep most major operating parameters; individually or together. It's programmable right on the front-panel.
Note: this unit has GPIB/488 computer-interface option too....control it from your PC.
(note; the LED display works perfectly....it's the digital-camera speed that makes it look 'spotty' here)

I don't have the equipment to run a full set of
tests on it, but I do have a 150mhz portable scope, so I ran what
simple tests I could; to show you that it's powering up and putting out
controllable signals. Although I can't warranty it, as far as I know it's working perfectly in every regard.
The first
test I ran is shown in the picture above....putting a 0dbm 100mhz
carrier into the scope's 50 ohm input. The 2nd test, shown below,
was to increase the freq as high as I could show you with my
150mhz scope. At 500mhz, the scope was still game, but fading
fast...


One nice thing about buying this particular unit from me.....you don't have to worry about chasing down a manual for it, because...
The FULL SERVICE/OPERATIONS MANUAL IS INCLUDED !
Price includes free Priority-mail or UPS-ground to anywhere in CONUS !
To make it a "done deal", Email me at: "metal at fullwave dawt com"
Terms and Notes:
Payment: Cash, Check, or Paypal; email me for details to make payment
Shipping: Priority-Mail in CONUS included in price...and no BS extra fees for 'packing' or 'handling'.
Response Time: We live in the mountains now, and get into town a couple times a week for mail and groceries. Expect about a week between receipt/clearing of your payment and when the carefully-packed instrument is dropped off at the UPS terminal or Post Office in Medford, Oregon.
Note: the two plastic 'feet' on the rear are broken. That happened when it was shipped to me originally. I was going to epoxy them back on before selling it today, but I thought that you'd probably prefer to do that job yourself, to be able to choose your own glue, etc.. Both handles are still with the gen, for repair. These handles have no effect whatsoever on the operation of the generator.Go back to full list at: Selling my entire Electronics Shop
Extra Pictures of sides and rear-panel....

